Yang Jianxin
Ph.D., Associate Professor
Assistant Director, Fundamental Industry Training Center, Tsinghua University
Phone：62781922-1633
E-mail：yangjx@mail.tsinghua.edu.cn
1. Work Experience
2004.7-2006.7 Postdoctoral, School of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology. Cooperative Tutor: Professor Yu Yueqing
2006.7-2008.12 Lecturer, School of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology
2008.12-2012.6 Associate Professor, School of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology
2008.12-2009.12 Postdoctoral, ENS Cachan, France. Cooperative Tutor: Professor Bernard Anselmetti and Professor Nabil Anwer
July 2012 – Associate Professor, Basic Industry Training Center, Tsinghua University
Taught undergraduate course “Principles of Machinery” and graduate course “Machinery Analysis and Synthesis”.
2. Research Area
The main research fields are mechanism and robotics, computer aided tolerance design, machine tool dynamic characteristics analysis and CAD/CAM/CAE.
Undertaken 12 National and Beijing Natural Science Foundation Projects.
3. Honors and Awards
Teaching achievements:
In 2012, as a tutor, he won the first prize in the Fifth National University Students’Machinery Innovation Design Competition.
In 2012, as a tutor, he won three first prizes and one second prize in the 6th Capital University Machinery Innovation Design Competition.
In 2010, he won the second prize of the 4th National College Students’Machinery Innovation Design Competition as a tutor.
4. Selective Publications
More than 40 papers have been published, of which 2 were retrieved by SCI and 14 by EI.
Yang Jianxin, Wang Junying, Wu Zhaoqiang, Nabil Anwer. Statistical tolerancing based on variation of point-set. 12th CIRP Conference on Computer Aided Tolerancing, Huddersfield, United Kingdom, 2012, Paper ID: 45.
Yang Jianxin, Yu Yueqing, Nabil Anwer, Bernard Anselmetti. Tolerance analysis of parallel mechanism with link deviation and joint clearance. 13th World Congress in Mechanism and Machine Science, Guanajuato, Mexico, 2011, Paper ID: A11_306.
Yu Yueqing, Du Zhaocai, Yang Jianxin, Li Yuan. An experimental study on the dynamics of a 3-RRR flexible parallel robot. IEEE Transactions on Robotics, 2011, 27(5): 992-997. (SCI: 829LQ, EI: 20114114420636)
Philippe Serré, Nabil Anwer, Yang Jianxin. On the use of conformal geometric algebra in geometric constraint solving. Guide to Geometric Algebra in Practice, Springer, 2011, Part 4, 217-232.
Bernard Anselmetti, Robin Chavanne, Yang Jianxin, Nabil Anwer. Quick GPS: A new CAT system for single part tolerancing. Computer-Aided Design, 2010, 42(9): 768-780. (SCI: 633MW, EI: 20103213137406)
Yang Jianxin, Gao Huifang, Yu Yueqing. Tolerance analysis of parallel mechanism with joint clearance. The 2010 International Conference on Mechanism and Machine Science, Shanghai, China, 2010. Paper ID: CCMMS2010-11.
Si Guoning, Yu Yueqing, Yang Jianxin. Dynamic modeling of multi-axis synchronous machining center. 2nd IEEE International Conference on Advanced Computer Control, 2010, 3: 33-37. (EI: 20104213306483)
Si Guoning, Yu Yueqing, Yang Jianxin. Dynamic simulation of a multi-axis synchronous machining center. 2010 International Conference on Computer Modeling and Simulation, 2010, 3: 98-98. (EI: 20101712877001)
Yang Jianxin. Synthesis of mathematical models for functional tolerance analysis. LURPA, ENS Cachan, 2009, Technical Report.
Du Zhaocai, Yu Yueqing, Yang Jianxin. Dynamic model of a flexible 5R parallel robot. 13th World Congress in Mechanism and Machine Science, Besançon, France, 2007, Paper ID: 330.
Du Zhaocai, Yu Yueqing, Yang Jianxin. Analysis on dynamic stress of planar flexible parallel robots. Frontiers of Mechanical Engineering in China, 2007, 2: 152-158.
Yang Jianxin, Yu Dingwen, Wang Jinsong. Inverse kinematics and dynamics of a novel 3-axis hybrid machine tools. Chinese Journal of Mechanical Engineering(English Editon), 2004, 17(SUPPL): 244-247. (EI: 2005249160706).
Three copyright of computer software:
Database System for Static, Dynamic and Thermal Characteristics of Machine Tool Joints V1.0, 2010
Realization Software V1.0 for DSI-based Grid Deformation in CATIA, 2009
Machine Tool Joint Characteristics Analysis System V1.0, 2008
